PQ
dirtier than a wicker toilet seat
Different
Posts: 18
|
Post by PQ on Feb 26, 2004 17:55:41 GMT -5
So Bill what's your view on me puttin some flanges on Blue and makin her fulltime 4wh drive?
|
|
|
|
Post by psychobilly on Feb 26, 2004 18:33:52 GMT -5
It will eliminate any hub failures, will work just dandy pq
|
|
Crip
stoopid noob
Posts: 7
|
Post by Crip on Feb 26, 2004 23:45:06 GMT -5
sounds good, but if the front gets damaged, you won't freewheel without disassembly.
|
|
|
|
Post by psychobilly on Feb 27, 2004 2:33:01 GMT -5
true, but a flange is easy to remove and would make the axle shaft swaps easier when pq busts them out on the trail. Its not somthing I would make a must have but if you have the flanges pq and you wanna try em i say go for it. So when you wanna build your new radius arms PQ?
|
|
|
|
Post by hey on Feb 27, 2004 14:55:28 GMT -5
Well when ya wanna do it? Looked her over today and the tranny crossmember welds broke and so this is a good time.....when and where do i get what i need to do it?
|
|
PQ
dirtier than a wicker toilet seat
Different
Posts: 18
|
Post by PQ on Feb 27, 2004 14:58:34 GMT -5
Hey that was me!  |
|
PQ
dirtier than a wicker toilet seat
Different
Posts: 18
|
Post by PQ on Feb 27, 2004 14:59:35 GMT -5
Also, I was told we could have used that old rad arm mount.....can we?
|
|
|
|
Post by psychobilly on Feb 27, 2004 15:02:16 GMT -5
You will be needin 2 of them 3 point tractor thingies from tractor supply and some metal channel. I got most the tubeing you will need.... I think. Soon as I get the chev out of the basement it is on. We will lengthen the arms a lil and get em up higher, also make an adjustable track arm. Dont worry about pickin stuff up, we will go get it when you bring her up, its only a 20 minute jaunt to tractor supply, should only take an afternoon to do it all up nice.
|
|
|
|
Post by psychobilly on Feb 27, 2004 15:03:04 GMT -5
You can bring it if ya want but i think I got a better idea.
|
|
PQ
dirtier than a wicker toilet seat
Different
Posts: 18
|
Post by PQ on Feb 27, 2004 15:42:05 GMT -5
Alritey then!
|
|
